• Follow us
Home > News > Content
LED Flood Lights Broadest
Oct 10, 2017

LED projection Light (leddownlight) also known as spotlights, projection lights, spotlights and so on, mainly used for building decorative lighting use, as well as commercial space lighting, LED Flood Lights decorative components are heavier, the outside type has round also good, LED Flood Lights because the general need to consider the cause of the heat, Therefore, its appearance and the traditional projection light still have some difference.

At present, the commonly used led projection lamps are basically 1W high-power led (each LED element will have a high light efficiency lens made of PMMA, its main function is two times to allocate led light, that is, two optics), and a few companies because of heat treatment technology, LED Flood Lights The use of 3W or even higher power led. Suitable for large-scale lighting, buildings and other lighting.

1, high purity aluminum reflector, the most accurate beam, the best reflection effect.

2. Symmetric narrow angle, wide angle and asymmetric light distribution system.

3, open the back to replace the bulb, maintenance is simple.

4. The luminaire is equipped with a scale plate to adjust the illumination angle conveniently.

LED projection light through the built-in micro-chip control, in small-scale engineering applications, can not be used in the controller, can achieve gradient, jump, color flicker,LED Flood Lights random flicker, alternating and other dynamic effects, but also through DMX control, to achieve chase, scanning and other effects. At present, its main application sites probably have these: the monomer building, LED Flood Lights the history of architectural buildings outside the wall lighting, building light outside the lighting, indoor lighting, green landscape lighting, billboard lighting, medical culture and other specialized facilities lighting,LED Flood Lights  bars, ballroom and other entertainment atmosphere lighting and so on.

LED Floodlight is a point light that can be evenly illuminated in all directions, its irradiation range can be arbitrarily adjusted, in the scene is shown as a positive eight-body diagram. Floodlight is one of the most widely used light sources in the production of effect diagrams, LED Flood Lights and the standard floodlight is used to illuminate the whole scene. Many floodlight can be used in the scene to produce better results. Floodlight is the most widely used in the effect diagram of a light source, in the scene can be used to coordinate the role of multiple floodlight, in order to achieve a better effect.

It is the best way to illuminate an object in all directions from one particular point to another, using it to analogy bulbs and candles. Floodlight can be placed anywhere in the scene. For example, LED Flood Lights it can be placed outside the camera range or inside an object. It is common to use many different colors of floodlight in the distance of the scene. These floodlights can cast shadows and mix them on the model. Because the illumination range of floodlight is relatively large, the illumination effect of floodlight is very easy to predict, and there are many auxiliary uses for this kind of light, for example, LED Flood Lights placing the floodlight near the surface of the object will produce bright light on the surface of the object.

Note that the floodlight can not be built too much, otherwise the effect of the map will appear dull and stiff. Therefore, in peacetime effect map production, pay more attention to the lighting parameters and the effect of the entire scene of the effects of the light, accumulate experience, master the lighting collocation skills.