SMD led flood light

Installation of materials to be used: LED flood light fixtures, with waterproof function of transformers, splitter, the steps are as follows: 

1, the installation of guardrail, drilling on the wall, spacing in accordance with the actual requirements, generally in 3 cm;

 2, do anti-static measures, such as the workbench to grounding, workers wear corresponding electrostatic clothing, anti-static measures, Because different grades of wholesale 12 volt led lights quality is different, antistatic capacity is different; 

3, the installation of attention to sealing, poor sealing, the diameter of the impact led floodlight life;

4, wholesale led flood lights outdoor high power wiring preferably not more than 25 cm, transformer power can be correspondingly longer, otherwise affect the brightness. 

Note 1, as far as possible the use of series led shape, because the LED floodlight lamp voltage difference is special. Ordinary led peak current to maintain at 80 MA, reverse voltage in 6V up and down, in the LED application should pay attention to design circuit peak voltage and current at this limit. 

2, welding use of 25 watts below voltage, soldering iron temperature under 300 degrees Celsius under high temperature exposed SMD LED, do not squeeze its epoxy resin part, or with a sharp hard object to wipe, because LED lamps are very fragile, very easy to damage, welding time of 3 seconds. Razorlux Lighting remind you of the widespread use of LED floodlight, so the installation of skills and considerations are very important, LED is a new light source, in the correct installation mode, to ensure that led floodlight stable long-term normal work.

For more details, contact us at email:

Leave a Reply