Professional LED Solution
This page is about our news and knowledges.
LED bulbs can flicker or buzz if the current (the flow of electrical charge) doesn’t remain constant. There are a number of possible causes for this: 1. Incorrect dimming set-up This causes flickering and buzzing, and is usually down to Read More
Definition of IES LM-79 : An LM79 report measures the performance (light) of LED-based luminaires based on specific and collective components which include drive current (mA), CCT (color temperature), watts, efficiency and distribution. LM79 requires complete luminaire testing. The main test of IES LM-79 Read More
Research on Temperature Characteristics of White Light Illuminated LED Lamps by Jin Shangzhong Zhang Shusheng Institute of Optoelectronic Technology, China Institute of Metrology (310034) Hou Minxian The Optoelectronic Information Department of Zhejiang University (310027) caused long shift of blue peaks Read More
At present, one of the biggest technical problems of LED lamps is the heat dissipation problem. The poor heat dissipation has caused the LED light source to decay prematurely, which limits the further development of the driving power supply. Only by exposing the heat Read More
Measuring light intensity is important when designing a room’s lighting or preparing for a photograph. The term “intensity” is used in different ways, so take a moment to learn what units and measuring methods match your goals. Professional photographers and lighting installers Read More
All Fluorescent Lamps and Tubes Should Be Recycled or Disposed as Hazardous Waste All fluorescent lamps and tubes are considered hazardous waste in California when they are discarded because they contain mercury. (Title 22, division 4.5, chapter 11, section 66261.50) Read More
2019 Hong Kong International Lighting Fair(Spring Edition) will be held from 6 April to 9 April 2019. Welcome to visit out booth. Our Booth No. is 1D-C29. Add: Hong Kong Exhibition and Convention Center(Hong Kong) Welcome to our booth! contact Read More
SMD: It is an abbreviation of Surface Mounted Devices, meaning: surface mount device, which is one of the SMT (Surface Mount Technology) components. In the initial stages of electronic circuit board production, via assembly is done entirely by hand. SMD means Read More
As many of you may have found out, not all LED lamps and/or lighting fixtures are created equal. A common problem that we run into within our industry is when a customer wants to replace their existing incandescent lamps with Read More
Problems with led lights flickering When they change out all of their LED Lamps and lighting fixtures and then turn them on, they often find them flickering. There are many reasons why an LED lamp can flicker, but the most common cause Read More