led bead
  1. Low power consumption: LEDs with a luminous efficacy of 75 lm/w are reduced by 80% compared with incandescent lamps of the same brightness;

2, long life: product life of up to 50,000 hours, 24 hours continuous lighting available for 7 years

3, nanosecond response speed, easy to control the dynamics of brightness and color: color dynamics and digital control

4, the design space is large: can achieve the organic integration with the building, to achieve the effect of only seeing the light.

5, environmental protection: no harmful metal mercury, no infrared and ultraviolet radiation.

6, color: different wavelengths produce different colored light, bright saturation, no filter, can be used to control the red, green and blue three primary colors to form a variety of different colors, can achieve full color gradient and other color-changing effects.

7.High efficiency and energy saving Under the same brightness condition, the LED energy-saving lamp consumes only 1 kWh (1W) for one thousand hours, the ordinary incandescent lamp consumes 1 kWh for 17 hours, and the ordinary energy-saving lamp consumes 1 kWh for one hour;

8.Long life The service life can reach more than 50,000 hours, the service life of ordinary energy-saving lamps is 6,000 hours, and the service life of ordinary incandescent lamps is one thousand hours;

9.Light health The light does not contain ultraviolet and infrared rays, no radiation, and ordinary energy-saving lamps and incandescent light lines contain ultraviolet and infrared rays;

10.Green environmental protection does not contain harmful elements such as mercury and lead, which is beneficial for recycling and utilization, and does not cause electromagnetic interference. Common lamps contain harmful elements such as mercury and lead, and electronic ballasts in energy-saving lamps generate electromagnetic interference. ;

11.Protection of vision DC drive, no stroboscopic, ordinary lights are AC drive, it will inevitably produce strobe;High light efficiency, low heat generation, 90% of electrical energy is converted into visible light, 80% of ordinary incandescent light is converted into heat, and only 20% of electrical energy is converted into visible light;

High safety factor The required voltage and current are small, the heat is less, there is no safety hazard, and it can be used in dangerous places such as mines.

For more details, contact at email: [email protected]

Leave a Reply