For a super hand-wavy, ballpark answer, let’s say it’s a pine pole, 30 ft tall and 1 ft in diameter (0.5 ft radius). The volume of that pole is 30 * pi * 0.5^2, so 24 cubic feet. The density of pine is ~30 lbs per cubic foot, so this hypothetical pole weighs 30 * 24 = 720 pounds.
The average cost of a utility pole is around $1500 for woodversion. The cost of installation and the attached equipment canincrease costs considerably.
Cost of replacing a street light pole
I know this one from experience!!! The pole , depending on how tall it is and how much weight it need to carry will run between $500 -$1400. The cost to put it in will depend on the power company. Sometimes, the person’s car insurance will pay for the replacement if it was a car collision that caused the damage.
well first…if the pump is making a loud grinding type noise then maybe all you need id a bearing job….but if the pump needs replacing..it all depends on the size of the pump and the size of your spa…middle priced pumps go for around 189.00 maybe 230.00…and having worked on pools and spas for years i’d say go for a jucuzzi brand or a hayward…and as for the light …if it’s a big hayward brand they go for 110.00…..but if you think you can just replace the bulb….good luck
Most utility poles square measure made from wood, pressure-treated with some variety of preservative for cover against rot, fungi and insects. Southern yellow pine is that the most generally used species within the United States; but, several species of long straight trees square measure want to build utility poles, as well as Douglas fir, jack pine, true pine, western red cedar, and Pacific true fir.
Traditionally, the preservative used was creosote, however as a result of environmental issues, alternatives like pentachlorophenol, copper naphthenate and borates have become widespread within the us. within the us, standards for wood preservative materials and wood preservation processes, alongside take a look at criteria, square measure set by ANSI, ASTM, and yankee Wood Protection Association specifications.
Despite the preservatives, wood poles decay and have a lifetime of about twenty-five to fifty years counting on climate and soil conditions, so requiring regular scrutiny and remedial preservative treatments. pecker harm to wood poles is that the most important reason for pole deterioration within the U.S.
Other common utility pole materials square measure steel and concrete, with composites conjointly turning into a lot of rife. One explicit proprietary utility pole variant utilized in Australia is that the Stobie pole, created from 2 vertical steel posts with a block of concrete between them.
The standard utility pole in the United States is about 40 ft (12 m) long and is buried about 6 ft (2 m) in the ground. However, poles can reach heights of 120 ft (37 m) or more to satisfy clearance requirements.
Hmm, Do check and get more recommendations for pumps of better quality.
If your light fixture is more than 8 years old have a new assembly installed.
The average cost of a light pole according to the New York Times is $1,200. This number was provided as an average cost to replace light poles stolen in Baltimore. A further source states that the cost to replace light poles in Chico is $8,000 for five light poles, or a total of $1,600 per pole. Therefore it is reasonable to assume that light poles cost anywhere from $1,200 to $1,600 each.
utility pole class chart
|minimum circumference at top (inches)|
|minimum circumference at 6 feet from butt (inches)|