Before installing, servicing, or performing routine maintenance on this equipment, please follow these general precautions:
Commercial installation, service and maintenance of the fixtures should be performed by a qualified licensed electrician.
If you are unsure about your wiring, consult a qualified electrician or local electrical inspector, and check your local electrical code.
To prevent wiring damage or abrasion, please do not expose the wiring to edges of sheet metal or other sharp objects.
Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.
Installation of LED high bay lights
Please check if the LED high bay lights is in good condition before installation.
Fix and lock the two chains to the supporting ceiling element.
Attach the V-hooks to the mounting holes of the lamp and then connect the hooks with the chains.
Double check all steps taken before moving to the next installation step.
Wiring Connectiong: Connect the black and white line of the lamp separately with the neutral line and live line of mains supply. The green wire must be earthed. Use only UL approved wiring.
For the additional dimming function connect the dimming cable Dim+(Purple) and Dim-(Gray) to a 0-10V dimmer.
Please make sure the power is off before maintenance.
To avoid any damage to the product, please do not use chemical solvent during routine maintenance.
To ensure better lighting, please clean the panel light at regular intervals.
The product is under warranty for 5 years beginning on the data of purchase. If you require assistance, please contact customer service.
We provide service for products bought from LED or form certified LE retailers. If you purchased this product elsewhere, please contact the place of purchase to get customer support.