• Follow us
Razorlux 200W Explosion Proof LED Lighting With UL844 DLC Certification

Razorlux 200W Explosion Proof LED Lighting With UL844 DLC Certification

200w high power explosion proof led lighting
High Efficacy low decay 700MA LED chip
Working temperature: -30ºC to 50ºC
MEANWELL HLG series driver, the highest level of MEANWELL driver


Razorlux 200W Explosion Proof LED Lighting With UL844 DLC Certification

Introduction of Explosion Proof LED Lighting:

This 200-watt explosion proof led lighting replaces 400-watt metal-halide (MH) lights with comparable output and lasts 5 times longer. Explosion Proof LED Lighting was designed specifically to replace conventional lighting in a wide variety of Hazardous Area applications.

In order to strengthen the explosion proof LED lighting cooling, in the past, the FR4 printed circuit board was not enough to deal with, so a printed circuit board with Metal Core, called MCPCB, was used to accelerate the heat dissipation by using better heat conductivity metals such as aluminum or copper, but also due to the characteristics of the insulating layer, the heat conduction was limited.

Dimensions of Explosion Proof LED Lighting:

LENGTH :400mm

WIDTH :400mm

HEIGHT: 185mm


Features of Explosion Proof LED Lighting:

 High quality LM80 Certify Chip

 Efficacy : up to 150lm @ 350Ma (per watt)

Rated Life of 100,000+ hrs

Operation temp: -30 ºC to +50 ºC

No toxic chemicals/Rohs compliant

70%-80% saving compare to HPS/MH

5 years warranty

Highest Ingress Protection rating : IP68

Application Of Explosion Proof LED Lighting:

  1. Applicable to hazardous sites in areas 1 and 2 of the explosive gas environment;

  2. Applicable to IIA, IIB, IIC-level explosive gas environment;

  3. Suitable for flammable dust environment 20, 21, 22 area,

  4. Suitable for the temperature group for the T1-T6 environment.

Maintenance of Explosion Proof LED Lighting:

In the maintenance of daily maintenance, you need to pay attention to the following points. Explosion Proof Lighting, lampshade should be able to automatically cut off the power before opening. However, the installation of interlocking devices is more complex and difficult to achieve, so most of the lamps only in the shell clearly set "no live on" and other words warning signs. Also because the bulb power off after the surface temperature is still very high, if the lampshade is opened immediately, there is still the danger of igniting the explosive gas mixture (mainly refers to the explosion-proof structure), so the incandescent lamp, high-pressure mercury lamp, high pressure sodium lamps, these light bulbs with high surface temperature, and can quickly open the lid of the lamp to pay attention to this point.

Installation of Explosion Proof LED Lighting:

Four different installation.jpg

200w Explosion Proof LED Lighting.jpg

200w Explosion Proof LED Lighting-1.jpg

200w Explosion Proof LED Lighting-2.jpg

Related Products