port lighting

Industrial lighting involves a wide range of locations and operations, ranging from fine processing in small workshops to heavy industrial production in tall buildings, as well as in hazardous locations such as inflammables and explosives.

Industrial lighting involves a wide range of sites and operations, ranging from fine processing in small workshops to heavy industrial production in tall plants, as well as in hazardous areas such as inflammables and explosives. According to the different places and the nature of the work, the corresponding design is provided to provide comfortable, economical and safe lighting for the staff. Factory Lighting Requirements Industrial lighting should ensure the comfort and safety of workers with a certain illuminance. Reasonable lighting balances the lighting level of the entire ground area and working surface.

Emergency lighting (accident lighting) requirements Accident lighting meets: Under normal lighting conditions, it can be quickly activated to complete emergency lighting. The factory must have accident lighting and safety evacuation instructions.

Hazardous area lighting requirements The layout of the refinery and tank farms is extremely complex, with major lighting obstacles and working surfaces of different height levels.

The high-level floodlights are installed in a number of locations outside the hazardous area to provide safe walking and some piecework work. In other places where the system does not provide sufficient illumination, some scattered local lighting fixtures such as stairs, aisles, valves and metering areas need to be installed.

In addition, consider the movement of trucks, forklifts, lift arms and gantry cranes.

Floodlights mounted on high poles, towers or construction sites provide general illumination for the locomotive on the rails, the means of transport on the road and the safety actions of the crew, while the local lighting for the shipment is provided by the gantry The spotlight on the finish is completed. Because there will be vibrations at these locations, gas discharge lamps with better seismic performance are more suitable, but it is necessary to pay attention to the fluctuation range of the control voltage can not exceed the standard of the lamps, otherwise the lamps are extremely easy to break.

Port lighting requirements For the lighting of the terminal, the floodlights should be installed at the periphery of the boundary so that the lights are not affected by obstacles in the work area, that is, where the goods are loaded and unloaded. This arrangement may cause shadows on the deck of the ship that is moored on the shore at low tide. Therefore, it is necessary to have floodlighting on the deck and on the crane arm.

harbor lighting

Docks and deck luminaires must be resistant to marine saline environments; commonly used materials are die-cast aluminum, brass, stainless steel and other plastics. Also, make sure that the lighting on the side of the dock does not interfere with the navigation lights.

The value of quality lighting brings you

Safe and reliable, eliminating safety hazards

High efficiency and energy saving, meeting energy saving and emission reduction requirements

The product is maintenance-free, reducing the safety risks of high-altitude maintenance and repair and replacement costs.

Lighting characteristics in different areas

Our lighting solutions are tailored to different lighting areas and offer additional value in the context of quality lighting. The following is a detailed description of the solutions and advantages of our lighting equipment for the door machine, ship unloader, shore bridge and other areas.

Comfort lighting - door lighting

The LED lamps installed in the door machine are mainly to provide high-quality lighting for the normal work of the field workers. The lamps are matched with various light distribution according to the high and low environment to ensure the illumination and uniformity of the site, improve the work efficiency, eliminate the safety hazards, and use the lamps on average every day. Time is 12 hours.

Anti-vibration lighting - ship unloader lighting

When the ship unloader is in normal operation, the vibration is large and the on-site lighting environment is harsh. Our luminaire adopts the anti-vibration gear occlusion adjustment plate, which can resist the strong vibration on the site and ensure that the lamp does not detach from the long-term use of the lamp, and the bracket does not break.

Leave a Reply