requipment for golf course lighting

Golf course lighting design requirements

  1, hitting area lighting. After the main shot, there must be at least

The pole is set at a distance of 5m. Use a wide-distribution luminaire so that there is enough diffuse light in the hitting area. At the same time, it is also considered that the golf course lighting are to be installed discretely In order to reduce or prevent the hitter from producing shadows in the hitting area.

2. The equipment of golf course lighting here can provide sufficient vertical lighting directly in front of the hitting area.Therefore, most of the lights must be set far ahead. Make sure that there is enough illumination on the flight trajectory and hit area hitting the ball. Can make the hitter look with the line of sight of the ball’s flight area and fall range.

 3, the arrangement of lamp posts and lamps, but also consider that there is sufficient horizontal illumination and uniformity. Minimize the light and dark changes in illumination.

4. The direction of installation and light projection of the led flood light for golf course lighting shall be such that the lamps and the direction of light projection on the main channel follow the direction of the line of sight of the hitter and avoid the occurrence of strong direct glare in the reverse direction. Lighting fixtures on adjacent channels should be protected from direct glare by their direct light.

Leave a Reply