IP65 rating lighting

IP Rating Definition
IP (Or "Ingress Protection") Ratings Are Defined In International Standard EN 60529 (British BS EN 60529:1992, European IEC 60509:1989). An Ingress Protection (IP) rating of a product is represented by two numbers. The first number determines the protection rating against solid objects or materials. The second number determines the protection rating against the ingress of liquid/moisture.
What Do The Digits In An IP Rating Mean?
The Two Digits Stands For Different Forms Of Environmental Influence:
The First Digit Stands For Protection Against Ingress Of Solid Objects.
The Second Digit Represents Protection Against Ingress Of Liquids.

The Ingress Protection or IP rating is an important consideration during the selection of LED lighting products for any project. The IP rating reflects the suitability of the light fitting to specific environmental conditions in indoor and outdoor installations.

The first digit of an IP rating refers to the level of protection against solids, including dust particles, mosquitoes, moths, or flies. The second digit indicates the protection level against liquid with the number also providing guidance when it comes to on-site cleaning routines using sprays or water jets.

While dust resistance levels progress from 0 to 6, the water resistance rating is provided in a 0 to 9 range. In some cases, an X may be interchanged with one of the digits if it is not relevant to the requirements, for instance, IP4X.

An IP rating does not correlate to vandalism or other physical protection from impact; a separate classification called IK rating is used for this purpose.

IP Rating chart

A two-digit rating system established by the International Electrotechnical Commission, used to identify the level of protection against the ingress (entry) of foreign objects into the enclosure for a piece of electronic equipment.
As referenced in IEC/EN 60 529 standards, a product’s ingress protection is indicated by the two code letters IP followed by two numerals, each representing different forms of environmental influence. The larger the value of each digit, the greater the protection.

First digit:
Ingress of solid objects
Second digit:
Ingress of liquids
0 No protection No protection
1 Protected against solid objects over 50mm e.g. hands, large tools. Protected against vertically falling drops of water or condensation.
2 Protected against solid objects over 12.5mm e.g. hands, large tools. Protected against falling drops of water, if the case is disposed up to 15 from vertical.
3 Protected against solid objects over 2.5mm e.g. wire, small tools. Protected against sprays of water from any direction, even if the case is disposed up to 60from vertical.
4 Protected against solid objects over 1.0mm e.g. wires. Protected against splash water from any direction.
5 Limited protection against dust ingress.
(no harmful deposit)
Protected against low pressure water jets from any direction. Limited ingress permitted.
6 Totally protected against dust ingress. Protected against high pressure water jets from any direction. Limited ingress permitted.
7 N/A Protected against short periods of immersion in water.
8 N/A Protected against long, durable periods of immersion in water.

Example: IP65 rated LED flood light
The two digits represent different forms of environmental influence:
The first digit (6) indicates protection against the ingress of dust and all other solid objects.
The second digit (5) indicates protection against low pressure jets of water from any direction.
This IP65 rated outdoor LED light would be better protected against environmental factors than another similar product rated as, for example, IP42.
Note: Some manufacturers may also rate the ingress protection of a product using NEMA 250-2003 standards. For definitions of these enclosure types see the NEMA site.

What is the difference between IP65, IP67

IP65 - IP rated as "dust tight" and protected against water projected from a nozzle. “Protected against water jets from any angle” do not submerge IP65 LED lights, these are not waterproof.

IP 67 - IP rated as "dust tight" and protected against immersion “Protected against the events of temporary submersion (10 minutes) , so do not submerge IP67 LED lights for extended periods.

Which IP Rating do I need?

In most outdoor displays where you worry about rain and irrigation sprays, IP-65 is typically good enough. IP65 for exposed outdoor lighting, and IP67 for fishing industries,such as seaport,airport,ship…

IP Rating for Razorlux Series LED flood lights( IP65 Upgradeable to IP67)

Razorlux's Newly Genius light housing with red color seal, use heavy duty gasketing and silicon on all mating surfaces to completely protect the electrical comonents , powder coating for excellect corrosion risistance durability , it can keep working on harshest of environments, which can be used on airports, seaport, heavy industries, big commercial buildings, mining industry, marine, fishing industries.

For more details, contact us at email: info@razorlux.com.

Leave a Reply