led parking lot lights

Description of LED Shoebox Lighting:

The traditional LED shoebox lighting design mainly focuses on the LED lumens and pays less attention to the heat dissipation. In fact, LED lumens are increasing rapidly. The number of lumens per watt for mass-produced leds reached 100 lumens in 2009 and is growing rapidly. The corresponding theoretical system of heat transfer has been mature, and the heat transfer means we can use are basically clear: conduction, convection, radiation and phase change heat transfer. Therefore, in terms of heat transfer or heat dissipation, the measures we can take are visible and limited.

led-light-analysis
led-light-analysis
Ultria Genius  Genius Ⅱ

Model of 200W led flood light


RGL2-200A
Beam Angle 40° 60° 120° 140°
Stable Flux(5700K after 1 hour) 26000lm
Dimension 474X388X982mm
Power Consumption  LEDs 180W
Power Supply   20W
Total 200W
Replace HID Lamp 400~600W
Net Weight 15kg (30lbs)
Color Temperature 5700K (2700~6500K available on request)
Color Rendering Ra75(Ra80,Ra90 available on request)
Working Life 50000Hrs
Housing Material Aluminum & Powder coating
Coating Zinc Rich Paint
IP Class IP 67 
Insulation Class Class I
Working Temperature -40C ~ 60C / -40F ~ 140F
Working Humidity 10% – 95%
AC Input 80~315Vac, (347Vac available on request)
THD <10%
Power Factor 0.98
Warranty:
5 years


LED street light
LED street light

The heat dissipation technology of LED street lamps is generally used in the way of heat conduction plate, which is a 5mm thick copper plate. In fact, it is a mean temperature plate, and the heat source is evenly heated. There are also radiators for cooling, but they are too heavy. Weight on the street lamp system is very important, because of the high street light is 9 meters, if too much risk increases, especially in typhoon, earthquake can cause accidents.

There are domestic manufacturers adopt the world’s first acicular heat dissipation technology, acicular radiator cooling efficiency than conventional flake radiator has a great range, can make the LED junction temperature is lower than ordinary radiator more than 15 ℃, and the waterproof performance is better than ordinary aluminum radiator, also improved on the weight and volume. In addition, the graphite fin developed for high-power LED lamps also has good heat conduction and heat dissipation performance.

For more details, contact us at email:[email protected].

Leave a Reply