Waterproof Marine High Intensity Led Flood Light

Waterproof Marine High Intensity LED Flood Light

Marine operations can't afford lighting failures. When your crew works through polar nights or tropical storms, standard Waterproof Marine High Intensity Led Flood Light corrode within months—forcing costly replacements and risking safety violations. Xi'an Razorlux's 1000W marine floodlight solves this with IP67 waterproof sealing and C5M corrosion resistance proven across 500+ commercial vessels. Our 5-year warranty and 130LM/W efficiency cut your maintenance costs by 60% while meeting RMRS, UL, and CE marine certifications.

Waterproof Marine High Intensity LED Flood Light Specifications

​​​​​​​

Why This Fixture Outlasts Standard Marine Lights

Engineered for Harsh Seas

Saltwater destroys ordinary floodlights within 18 months. Our housing uses die-cast aluminum with electrophoretic coating—the same protection on offshore oil platforms. After 1,000+ hours in ASTM B117 salt spray chambers (equivalent to 5 years at sea), fixtures show zero corrosion penetration.

The IP67 seal withstands direct wave impact and submersion. Breathable membranes prevent internal condensation during temperature swings from -40°C Arctic waters to +55°C engine room heat. Result: 50,000+ operational hours with minimal maintenance.

Universal Vessel Compatibility

Most marine lights fail when connected to incompatible power systems. This fixture accepts any voltage from AC90-305V to DC127-431V—whether your vessel runs on 110V shore power, 220V generators, or 24V battery banks.

Flexible Lighting Coverage

Different tasks need different beam patterns:

· 15°-30° narrow beams: Illuminate piers 200+ meters away during night berthing

· 60° medium beams: Light cargo decks and work areas

· 140°x60° wide beams: Cover entire vessel sides for inspections

Adjustable stainless brackets let you redirect light as operations change. Installation takes under 30 minutes with pre-drilled holes matching standard marine mount spacing.

Applications

We recommend upgrading the lighting system to Waterproof Marine High Intensity Led Flood Light.

Commercial Fishing Vessels

Night trawling requires seeing nets 50 meters out in freezing spray. This 1000W output penetrates fog while 5000K-6500K cool white enhances contrast for catch sorting.

Trawler operators report 40% faster deck operations and fewer crew injuries after switching from halogen fixtures. Vibration from diesel engines and wave pounding haven't caused a single mounting failure across our installed fleet.

Offshore Platforms & Tankers

24/7 operations on drilling rigs and LNG carriers demand zero lighting downtime. These fixtures maintain full brightness despite salt crust buildup that blinds standard lights within weeks.

EMI shielding meets CISPR 15 standards—preventing interference with radar, GPS, and radio systems. Helipad installations meet CAP 437 aviation lighting requirements for offshore crew transfers.

​​​​​​​

Shipyards & Dry Docks

Welders and inspectors need accurate color rendering. Our Ra>80 high-CRI option shows true paint colors and weld bead defects under bright illumination.

Modular mounts allow quick repositioning as work zones change. Maintenance crews access driver compartments without removing entire assemblies—critical during tight refit schedules.

Common Questions

How long before saltwater damages the fixture?

The IP67 seal and marine-grade silicone gaskets prevent water ingress during submersion. Our oldest installations (2018) on North Sea fishing boats still operate at 95%+ original brightness with zero corrosion.

Will this work with my vessel's electrical system?

Yes. The wide input range (AC90-305V, DC127-431V) works with any commercial vessel power—from 12V workboats to 440V cruise ships. Automatic voltage detection requires no manual switching.

Can I control brightness from the bridge?

Optional 0-10V or DALI dimming integrates with vessel management systems. Dim to 10% during transit, then full power for cargo operations—extending lifespan and reducing fuel consumption.

What maintenance is required?

Rinse lenses with fresh water every 6 months to remove salt deposits. Check mounting bolts quarterly in high-vibration areas. The sealed driver needs no service during the 5-year warranty.

How do I verify this is a genuine Razorlux product?

Each fixture has a laser-etched serial number and QR code. Scan to check our authentication database. Counterfeits lack our patented fin-style heat sinks and fail efficiency testing.

Contact Us

Get technical specifications for your project or request volume pricing:

Email our Waterproof Marine High Intensity Led Flood Light's team: sam@razorlux.com