300w led tennis court lights
Rated Power: 300W
Input Voltage: AC90-305, DC127-431
Color Temperature: 2700K-6500K
Lamp Efficiency: 130LM/W
Beam Angle: 15°, 20°, 30°, 40°, 60°, 120°, 140°x60°.
CRI: Ra>75
IP Grade: IP67
Bracket: Stainless Steel
Net Weight: 22KG
Warranty: 5 Years
Certificate:RMRS CE, RoHS, SAA, C-Tick, UL, DLC, CB, ISO:9001
- Product Description
300W LED Tennis Court Lights | Professional Sports Lighting by Razorlux
Upgrading your tennis court lighting shouldn't be complicated. Our 300w led tennis court lights delivertournament-quality illuminationat a fraction of traditional operating costs—without the glare that disrupts play.
The difference you'll see immediately:
· Crystal-clear ball visibility during night serves and baseline rallies
· Zero warm-up time—full brightness the instant you flip the switch
· 70% lower electricity bills compared to old 1000W metal halide systems
· No more bulb replacements for 10+ years

300W LED Tennis Court Lights Specification
Model | RGL2-300P | |
Beam Angle | 15° 20° 30° | |
Stable Flux (5700K after 1 hour) | 36000lm | |
| LEDs | 270W |
Power | Driver | 30W |
Consumption | Total | 300W |
Replace HID Lamp | 600~800W | |
Net Weight | 19kg with stainless steel floodlight bracket | |
Color Temperature | 2700-6500K | |
Color Rendering | ≥Ra75 (≥Ra80, ≥Ra90 available on request) | |
Working Life | ≥50000Hrs | |
Housing Material | Aluminum & Powder coating | |
Power Supply | Meanwell | |
IP Class | IP 67 | |
IK Class | IK 10 | |
Insulation Class | Class I | |
Working Temperature | -40C ~ 60C / -40F ~ 140F | |
Working Humidity | 10% ~ 95% | |
AC Input | 110-480Vac input voltage without additional adapter | |
DC Input | 100 ~ 400Vdc, 500Vdc ~ 800Vdc | |
THD | <10% | |
Power Factor | ≥0.98 | |
Warranty | LED Module | 5 year |
| Driver | 5 year |
| Housing | 10 year |

The Glare-Free Difference
Problem: Traditional Court Lights Blind Players
Standard flood lights spray light everywhere—including straight into players' eyes during serves. This "glare bomb" effect has derailed countless matches.
Solution: Precision Asymmetric Optics
Our 140°×60° beam pattern directs lightonto the court surfacewhile cutting off upward spill. Players see the ball clearly without light sources in their peripheral vision.
Technical deep-dive:The optical system uses computer-modeled reflector geometry tested in our Xi'an photometric lab (accredited to IESNA LM-79-08 standards). Each fixture undergoes goniophotometer validation before shipping.
ITF Standards Compliance:
· Class II (tournament level): 500 lux average with our 6-light layout
· Class III (recreational): 300 lux average with our 4-light layout

Installation & Compatibility
Works With Your Existing Poles
The 15kg fixture weight and adjustable stainless steel bracket fit standard tennis court pole infrastructure. Most facilities complete installation in one day using a local electrician.
What's included:
· Pre-wired fixture with 1.5m cable
· Adjustable mounting bracket (0-180° tilt)
· Installation guide with wiring diagrams
· Technical support hotline
Installation tip:Our engineers recommend positioning lights 1-2 meters outside the court perimeter at a 25-30° angle for optimal coverage and glare control.

Smart Control Ready
Add optional dimming and scheduling:
· 0-10V dimmingfor energy savings during practice sessions
· DALI integrationfor facility-wide lighting management
· Astronomical timerfor automatic dusk-to-dawn operation


Built to Last (Actually)
The Thermal Management Difference
LED lifespan depends entirely on operating temperature. Cheap fixtures run hot and fail early. We obsess over cooling.
Our approach:
· Die-cast aluminum housing with 47 cooling fins (32% more surface area than competitors)
· Thermal paste interface transfers heat from LED junction to heat sink
· Real-world testing: Junction temperature stays below 85°C even at 50°C ambient
The result:While typical LED court lights fade to 70% brightness after 30,000 hours, ours maintain 90%+ output past 50,000 hours. That's the difference between replacing lights in 2028 versus 2040.
Surge Protection That Works
Each 300w led tennis court light includes 10kV surge suppression circuitry—tested to IEC 61000-4-5 standards. During lightning season, this protection saves facilities thousands in replacement costs.

Why Razorlux?
23 Years of LED Innovation
We're not a trading company reselling generic fixtures. Razorlux designs and manufactures all lighting systems in our ISO:9001 certified facility.
Our background:
· Founded 1998 as an LED power supply manufacturer
· Transitioned to complete lighting systems in 2008
· Served infrastructure projects across Asia-Pacific region
· Team includes 4 PhDs in optical engineering and 12 IES-certified lighting designers
Quality control:Every production batch undergoes 72-hour burn-in testing with thermal imaging verification. We reject entire batches for color temperature deviations exceeding ±200K.

Common Questions Answered
"What if a light fails after 3 years?"
We ship a replacement within 72 hours at no cost. Our 5-year warranty covers manufacturing defects, LED failures, and driver issues. Failure rate since 2019: less than 0.3%.
"Do these work in extreme cold?"
Absolutely. Facilities in Minnesota and Alberta operate our lights year-round in temperatures below -30°C. The instant-on feature is especially valuable in cold climates (no waiting for metal halide warm-up).
"How do I dispose of old metal halide fixtures?"
We partner with recycling facilities in 8 states for proper mercury disposal. Ask about our trade-in credit program—some utilities offer additional rebates for decommissioning old lighting.
Contact Our Lighting Specialists
Razorlux Industrial Co., Ltd.
Contact our 300w led tennis court lights' team:sam@razorlux.com

_1750326878398.png)












