marine deck lights

150W Marine Deck Lights | 316 Stainless Steel | IP67 Waterproof

1. Survives Extreme Salt Water Environments

316 stainless steel brackets resist corrosion that destroys standard fixtures within months.

Real-world proof:Our marine deck lights pass 1,000+ hour salt fog testing (ASTM B117) — equivalent to 5+ years of continuous ocean exposure.

What this means for you:Lower replacement costs and fewer dangerous mid-voyage repairs.

2. Works With Your Vessel's Power System

Wide voltage range (AC 90-305V, DC 127-431V) handles power fluctuations common on:

· Commercial fishing vessels with variable generator loads

· Cargo ships operating across different port power standards

· Offshore platforms with complex power distribution

No voltage stabilizers needed.

3. Won't Interfere With Navigation Equipment

Every unit passes EMC/EMI testing to ensure zero interference with:

· VHF marine radios (156-174 MHz)

· AIS transponders

· GPS navigation systems

Critical for safety:Your communication systems work without disruption.

4. Multiple Beam Options for Different Tasks

Marine Deck Lights Specification

Where These Lights Work Best

Commercial Fishing Vessels

Challenge:Equipment takes constant abuse from net winches, deck washdowns, and 24/7 operation.

Solution:Mounts on gantries and masts illuminate aft decks and net drums even in dense fog. The 15kg solid construction stays secure despite heavy vibration.

Used by:Trawlers, purse seiners, and longlining vessels operating in North Atlantic and Bering Sea conditions.

Offshore Oil & Gas Platforms

Challenge of marine deck lights:Accessing fixtures for maintenance is expensive and dangerous.

Solution:Designed for "install and forget" reliability on catwalks, crane booms, and helidecks. Thermal management works from Arctic cold to tropical heat without performance loss.

Tested to:MIL-STD-810G vibration standards to survive engine harmonics and wave impacts.

Container Ships & Bulk Carriers

Challenge:Need safe deck illumination 20-30 meters below superstructure without creating glare that blinds bridge crew.

Solution:Anti-glare optics and multiple beam angles customize light distribution. Wide voltage compatibility handles port power variations worldwide.

Compliant with:International maritime navigation safety regulations (SOLAS).

Our Testing Goes Beyond Standards

Salt Fog:1,000+ hours continuous exposure (industry standard: 500 hours)

Waterproof:Vacuum submersion + thermal shock cycling (not just spray testing)

EMC/EMI:Verified zero noise in marine communication bands

Vibration:MIL-STD-810G military specification testing

About Razorlux Marine Lighting

Founded:2006

Specialization:LED lighting for extreme marine environments

R&D Facility:Xi'an LED Lighting Engineering Laboratory (NDRC-authorized)

Quality System:ISO 9001 certified for 22 consecutive years

Beyond Manufacturing

We provide engineering services:

· Free lighting efficiency simulation

· Custom lighting scheme design

· Classification society compliance verification

· Post-installation support

Notable projects:500+ commercial vessels equipped since 2006 (fishing fleets, cargo ships, offshore platforms across 30+ countries)

Common Questions

"Will these lights corrode like our old fixtures?"

Standard 304 stainless steel corrodes in salt water. We use316 stainless steelwith molybdenum added specifically to resist chloride pitting.

In side-by-side salt fog tests, 304 steel shows pitting after 200 hours. Our 316 steel shows zero corrosion after 1,000+ hours.

"How do I choose the right beam angle?"

Simple guideline:

· General deck work?→ 60°-120° flood beam

· Crane operations?→ 15°-30° spot beam

· Not sure / mixed use?→ 140°x60° asymmetric beam

"What if the fixture fails during a voyage?"

5-year warranty covers:

· Component failures

· Corrosion defects

· Light output degradation

Emergency support:Our technical team responds within 24 hours with troubleshooting guidance. If repair isn't possible remotely, we ship replacement units via expedited freight.

"Can I install these myself?"

If you have marine electrical experience: Yes. Installation is straightforward with included mounting hardware.

Galvanic corrosion warning:When mounting to aluminum hulls, use the included isolation gaskets. Direct metal-to-metal contact causes electrochemical corrosion.

Professional installation available:We can recommend certified marine electricians in major ports.

Get Your Custom Lighting Solution

Email Project Details

sam@razorlux.com